High Quality Stabilizer Link 46630-60B01 Sway Bar Stabilizer for SUZUKI GRAND – Madali

Product Features

1. Front wheel swing arm
It is designed and installed on the separate connection between the front axle and the front wheel, and its main function is to control the inclination angle of the front wheel.

2. Steering toe-in balance lever (a necessary accessory for the original car)
It is designed to be installed on the lower swing arms of the front wheels on both sides to control the overall symmetry of the front wheels. The main function is to be responsible for the forward inclination angle of the front wheel and maintain the tracking ability of the steering wheel.

3. Front wheel shock tower top balance rod
It is designed to be installed on the top of the front shock tower. The main function is to enhance the rigidity of the cabin and the front body, offset the frame deformation caused by centrifugal lateral torsion (severe deformation can cause tearing of the tower top), improve the vehicle’s cornering ability, increase the cornering speed, and reduce the body’s impact. The roll angle caused by centrifugal force;

4. Front bottom beam balance rod
It is designed to be installed at the connection between the front axle and the front of the frame chassis. The main function is to enhance the connection strength between the front bottom beam (front axle) and the chassis, reduce the displacement and deformation of the front axle caused by centrifugal force and body twist, and its main function is also to improve the cornering performance.

5. Rear wheel shock tower top balance rod
It is designed to be installed on the top of the rear shock tower. The main function is to enhance the strength of the trunk, reduce the lateral distortion caused by centrifugal force at the rear of the car, reduce the roll of the rear of the car when cornering, and improve the cornering performance of the vehicle.

6. Rear axle suspension enhanced balance rod
It is designed to be installed at the connection position of the rear axle and the rear of the frame chassis. The main function is to strengthen the connection strength of the rear axle and the frame.

7. Frame (body) chassis reinforced balance rod
It is designed and installed in the middle part of the frame chassis, the main function is to strengthen the overall rigidity of the frame chassis.
The abnormal noise of the chassis is largely caused by the aging of the rubber pads in the balance bar, which can be solved by spending dozens of dollars to replace it.

Product Specification